← Back to Pneumatics
🖥️ No Pressure Sim — Pneumatics simulator
ℹ️ How to use the simulator
- Click and drag components from the left-hand panel onto the canvas
- Click a red port on one component, then click a red port on another to connect them with a pipe
- Click ▶ SIMULATE to start the simulation — blue pipes show pressurised air
- Click buttons and valves during simulation to see the circuit respond
- Click ■ STOP to return to build mode
- Use Switch to Symbols to toggle between block and ISO symbol views
No Pressure Sim V2.4 — developed by Peter Strain, Bearsden Academy
Simulator user manual
No Pressure Sim — User Manual
Full guide to building and simulating pneumatic circuits
›
Tasks
✏️ Simulation tasks
- Build a simple circuit containing an air supply, a 3/2 button valve and a single-acting cylinder. Test it using the simulate button.
- Modify your circuit to use a 5/2 pilot-pilot valve and a double-acting cylinder.
- Switch to symbol view. Can you identify all the ISO symbols?
- Add a flow restrictor to control the speed of your cylinder. What effect does the restriction percentage have?
Tip: You can save your circuit at any time using the save button in the toolbar. Load it again in a future lesson to continue your work.